Twin Lever Deluxe Corker

Deluxe Twin Lever Wine Corker

Our deluxe twin lever corker has bottle neck restraint, with a simple two lever corker action. Due to the corks being compressed by forcing it through a tapered nylon chamber the Corks MUST be pre-soaked in a warm sanitising solution for at least 30 minutes.

Place the bottle to be corked on a bench top at a suitable height to allow full downward arm movement. Place cork in chamber and position corker on bottle top. Check cork is central if needed. Plunge the cork into the bottle in one swift motion. You may find that some corks will not be 100% inserted with this type of corker – If so adjust the nuts at the top of the corker threaded shaft. 

Note this type of corker REDUCES the length of the cork after corking due to it being forced through a tapered chamber.